Home » » Product - AMPROBE

Product - AMPROBE

Written By Electrical equipment on Nov 15, 2012 | Thursday, November 15, 2012


ACD-14 FX
Digital Clamp-On Multimeter

The ACD 14 FX is the professionals’ choice for both HVAC & Electrical applications due to its complete set of measuring features. Its dual displays allows viewing amperage and voltage simultaneously. When upgraded to TRMS capability the results are accuracy, reliability and professionalism.

* Dual Displays - Permits simultaneous reading of Amperage & Voltage
* Micro Amps measurement for testing “Flame Sensors”
* Capacitance to 3000 µF
* Temperature / Type-K Thermocouple
* AC and DC Voltage to 600V
* AC Current to 400A
* Resistance to 40MΩ with Continuity Buzzer
* Frequency measurement
* Diode test
* Hold and Maximum reading functions
* Accommodates conductors up to 1.02" (26mm) in diameter
* Auto ranging
* Auto power off and low battery indication
* Rubber over-molded case
* In rush current
* Display: 3-3/4 digits 4000 counts, dual LCD displays
* Unit ships with industrial test leads, carrying case, Type K thermocouple probe, battery and Users manual  


 

AM-140 TRMS
Digital Precision Multimeter with PC Connection

* True TRMS
* Optical isolated PC interface capability
* Auto and manual ranging
* Auto power off
* Data hold
* Back light display
* Large, easy to read LCD display
* Auto compensation of the test leads resistance
* Diode test
* Audible continuity


 
DGC-1000A
Clamp-on Ground Resistance Tester

* Accurate ground resistance measurement from 0.025 to 1500 Ohms
* TRMS current measurement including leakage current
* Accurate readings regardless of power quality in less than 10 seconds
* Continuity beep if the resistance is lower than 40.00 Ohms
* Simple and easy to use, no test leads or auxiliary electrodes necessary
* Data logging capability - 116 records
* Individual data point recording
* User selectable High & Low ohm audible alarms
* Auto power off (can be disabled)
* Low battery indicator
* Large LCD display  



DM-III Multitest
Power Quality Recorders

Amprobe’s full-featured Three-Phase Power Quality Recorders provide the essential functions and capabilities required to operate accurately and effectively in today’s demanding electrical environments.

*True RMS (TRMS)
*Measures and Records Broad Spectrum of Power Quality Parameters: AC Current, AC Voltage to 600V including Sags and Surges, Harmonics (THD and individual up to 49th), Active, Reactive and Apparent Power & Energy, Peak Demand, Power Factor, Frequency measurement, Phase sequence
*Compatible with wide range of Current Transducers
*Comes as a complete kit: CTs, Voltage Leads, Ground Probes & Leads, PC software and download cable are included with this product.
*Works with single and three phase systems (Y and Delta)
*Detects and records voltage anomalies, Sags and Surges
*Built in scope displays waveforms
*Phase sequence indication
*Records up to 64 parameters (single or three phase) simultaneously
*Manual and programmable recording start
*Password protection
*Selectable fundamental frequency of 50 or 60 Hz
*Special data compression system and user selectable rates allow recording from several hours to several years
*Download capabilities, Windows compatible PC software
*Displacement power factor for power factor correction determination
*Line or battery powered
*Megohmmeter functions: Tests insulation of wires, cables, transformers and electrical motors
*Selectable test voltages up to 1000V
*Programmable timer to perform the Dielectric Absorption Ratio Test
*Sensitive Ohmmeter for checking resistance of motor windings
*Selectable polarization of ohmmeter for checking grounding continuity
*Automatic voltmeter protects against misuse on hazardous energized systems  



 
GP-2 Geotest
Ground Resistance & Resistivity Tester


* Measures Earth ground resistance - 3 point (fall of potential) or 2 point tests
* Automatically calculates resistivity - 4 point test
* Automatic voltage measurement prevents false measurements
* Automatically applies three testing frequencies for the most accurate readings
* Test leads, auxiliary electrodes and software are included for complete instrument
* Auto ranging
* 999 internal memory locations to store measurements
* RS-232 download to a personal computer



HD110C
Heavy-Duty Digital Multimeter


The HD110C is designed for professional use in harsh environments. The meter is unusually rugged and reliable in everyday heavy use applications.The meter is made using waterproof construction to prevent dirt, grime and moisture from entering the case and causing inaccurate readings or damaging shorts.

Built of tough, fire-retardant thermoplastic resistant to grease and chemical spills, with all sensitive components shock-mounted for a drop resistant to at least eight feet.HD110C has an extended voltage measurement capability of 1500 V dc and 1000 V ac, unmatched by any other line of digital multimeters. The extended voltage ranges can withstand transients up to 12 kV.

* Highest voltage capability, measuring to 1500 V dc and 1000 V ac
* CAT IV 1000 V rated
* Special sealing for environment and water resistance. IP67 rated
* Constructed with drop-resistant housing and PCB mounting
* Magne-Grip™ holster, frees both hands for work
* Includes high voltage test leads with threaded alligator clips
* Display 3-1/2 digit LCD, 1999 counts, with annunciators
* Automatic Polarity Indication
* Low Battery Indication
* Standard 9 V battery, NEDA 1604, JIS 006P,IEC 6F2
* Flame retardant, high-impact thermoplastic Case
* Resistance Ranges 200 Ω, 2 kΩ, 20 kΩ, 200 kΩ, 2 MΩ, 20 MΩ

0 comments:

Post a Comment